Stacked Chart
Introduction
This guide helps you to create stacked charts for the user’s home page. To learn more about the home page charts in general and how to share them among the users in a certain sales group, see the guide Home Page Charts.
The pictures in this guide represent an example stacked bar chart about potentials’ values broken down by the sales person. It is also possible to turn a stacked chart into a percentage chart – you can find an example in Stacked Percentage Chart.
Creating the Chart
You can start creating a stacked chart by clicking the Add button 
on the home page and by selecting Chart. Give the chart a name and suitable sharing settings (if needed).
The settings of the chart will then appear on the home page. You can first see the fields Main module and Chart type:
- Main module – select the main module whose information is reported in the chart.
- Chart type – select “Stacked”.
Right below Chart type field there are more settings for the chart’s presentation. A stacked chart is shown as a bar chart by default, but you can also choose to make an area chart. Both presentation options can also be showed as percentages (see an example: Stacked Percentage Chart).
When you have specified the main module and chart type, more settings will appear (see also the picture below).
The fields On horizontal and On vertical are automatically filled with the same module as the main module. In many cases there is no need to use any other modules and then there is no need to change these selections. But if needed, you can also use the information in linked modules on the axis.
The reported information is then selected from the Field picklists for both the horizontal and vertical axis.
The field on horizontal axis is typically either a date field or a picklist. If you select a date field, a selection for grouping the date will appear next to it (whether the dates are grouped by month, year, etc.). In the example case in the picture below, the potentials’ Expected Close Date is selected for horizontal axis and they are grouped by months.
The field on vertical axis varies by the need at hand. In most cases a number field is selected (the values in this field are used to calculate sums or averages), but another common case is to select the potential’s/invoice’s/account’s/etc. number or CRM ID, which can be used to count the entities. You can use any field to count similar entities, and number fields can be processed to show sums or averages. In the picture below, the potentials’ Amounts are summed.
For the Stack by field, you must select the information that is used to stack the bars; in the picture, this information is the owner’s username.
When you are done with the settings on the Start tab, you can proceed to other tabs.
Conditions
On the Conditions tab, you can set a time range and other limitations for the reported data.
There are following options for the Time range:
- Current year – a full calendar year.
- Previous year – the previous full calendar year.
- Time span – a certain time period to the past or future from the present moment. You can set the time span by typing a number and a measure of time (month/quarter/half a year/year).
- Time span (past/future) – like the previous option, but you can set the time span to the past and future at the same time.
- No time range – ignore the time stamps and use all the data.
NOTE: If you have selected a date field for the horizontal axis, the time range is determined by that field. In all the other cases the entities’ Created time is used.
With the Filter field, you can easily add a filter to make the chart only show data assigned to the logged-in user or their sales group.
You can also create conditions for the chart the same way you would for e.g. a target group (for more information, see the guide Target Groups).
Titles
On the Titles tab, you can make the last adjustments for the chart.
You can set titles for the horizontal and vertical axis with the fields Horizontal title and Vertical title. The activated Show time range in title selection will add a title row that shows the time range for the data in the chart. The last setting is the color scheme used in the chart.
Outcome
When all the settings are ready, you can save the chart with the Save settings button at the top right corner. After that, you can see the chart by clicking Close settings next to it.
